TANGO
Device Server


Pulser of an Active Septum
Device Attributes Description

ActiveSeptumPulser Class

Revision: release_1_3_0 - Author: elattaoui

Scalar Attributes
Attribute name
Data Type
R/W Type
Expert
currentPeakValue: Current peak value calculated from Magnet currentSpectrum (16bits 0-10V for 0-XXXA full Scale)
DEV_DOUBLE
READ
No
timingTriggerDelay: Delay of the trigger coming from Timing.
DEV_DOUBLE
READ_WRITE
Yes
timingTriggerStatus: Status of the trigger coming from Timing:
0 -> none
1 -> present
DEV_SHORT
READ
Yes
timingEventNumber: Timing Event Number:
0 -> OFF
1 -> Precharge
2 -> ...
DEV_LONG
READ_WRITE
Yes
thyristorTriggerDelay: Delay of the Thyristor trigger (synchronized from Timing System).
DEV_DOUBLE
READ_WRITE
Yes
thyristorTriggerDuration: Duration time of the Thyristor Trigger (3 Hz comming from Linac)
DEV_DOUBLE
READ_WRITE
Yes
thyristorTriggerStatus: Status of the Thyristor trigger (comming from timing system):
0 -> none
1 -> present
DEV_SHORT
READ
Yes
mosInhibitDelay: Delay of the MOS Inhibit.
DEV_DOUBLE
READ_WRITE
Yes
mosInhibitDuration: Duration of the MOS Inhibit.
DEV_DOUBLE
READ_WRITE
Yes
mosInhibitStatus: Status of the MOS Inhibit (comming from timing system):
0 -> none
1 -> present
DEV_SHORT
READ
Yes
acqTriggerDelay: Delay time for the Acq Trigger (3 Hz comming from Linac).
DEV_DOUBLE
READ_WRITE
Yes
acqTriggerDuration: Duration time of the Acq Trigger (3 Hz comming from Linac).
DEV_DOUBLE
READ_WRITE
Yes
acqTriggerStatus: Status of the Acq Triggering:
0 -> none
1 -> present
DEV_SHORT
READ
Yes
interlockMac: Pulse inhibition:
0 -> valid (no Interlock)
1 -> inhibit (Interlock occured).
DEV_SHORT
READ
Yes
interlockPSS: High Voltage pulser inhibition:
0 -> valid (no Interlock)
1 -> inhibit (Interlock occured).
DEV_SHORT
READ
Yes
doorContacts: Pulser Door Contacts: back, front, left
0 -> door closed
1 -> door opened
DEV_SHORT
READ
Yes
groundedRelay: Grounded Relay:
0 -> not grounded (everything is OK)
1 -> grounded (1 defaut occured).
DEV_SHORT
READ
Yes
emergencyStop: Emergency Stop:
0 -> No Emergency Stop
1 -> Emergency Stop occured
DEV_SHORT
READ
Yes
overCurrentStatus: Over Current Status:
0 -> Ok
1 -> Default
DEV_SHORT
READ
Yes
capaVoltageStatus: Status of the Capacitor Voltage:
0 -> Ok
1 -> Default
DEV_SHORT
READ
Yes
energyStatus: Status of the Energy:
0 -> Ok
1 -> Default
DEV_SHORT
READ
Yes
waterCoolingStatus: Status of the Water Cooling System:
0 -> ON
1 -> OFF
DEV_SHORT
READ
Yes
dECStatus: Status of the DEClenchement:
0 -> present
1 -> none
DEV_SHORT
READ
Yes
tHTHStatus: Status of the Thermique Thyristor Default:
0 -> Ok
1 -> Default
DEV_SHORT
READ
Yes
staticCommutatorStatus: Status of the Static Commutator:
0 -> ok
1 -> default
DEV_SHORT
READ
No
auxiliaryCircuitStatus: Status of the Auxiliary Circuit:
0 -> ok
1 -> default
DEV_SHORT
READ
No
totalDefault: Total Default of the Pulser
At least, 1 default detected on the Pulser
0 -> Ok
1 -> Default
DEV_SHORT
READ
No





Spectrum Attributes
Attribute name
Data Type
X Data Length
Expert
currentSpectrum: Current read from the pulser (uses the 2005 board).
DEV_DOUBLE
100000
No






ESRF - Software Engineering Group