Device Properties |
Property name |
Property type |
Description |
Kz1_Factor |
Tango::DEV_DOUBLE |
Coefficient used with the dipole measurement mode
(AD) exterior blades |
Kz2_Factor |
Tango::DEV_DOUBLE |
Coefficient used with the dipole measurement mode
(BC) exterior blades |
Delta_Z |
Tango::DEV_DOUBLE |
Coefficient used with the dipole measurement mode |
Ca |
Tango::DEV_DOUBLE |
current offset on electrode A. this is the current measured when the beam is cut |
Cb |
Tango::DEV_DOUBLE |
current offset on electrode B. this is the current measured when the beam is cut |
Cc |
Tango::DEV_DOUBLE |
current offset on electrode C. this is the current measured when the beam is cut |
Cd |
Tango::DEV_DOUBLE |
current offset on electrode D. this is the current measured when the beam is cut |
Ka |
Tango::DEV_DOUBLE |
GAIN correction of the electrode A |
Kb |
Tango::DEV_DOUBLE |
GAIN correction of the electrode B |
Kc |
Tango::DEV_DOUBLE |
GAIN correction of the electrode C |
Kd |
Tango::DEV_DOUBLE |
GAIN correction of the electrode AGAIN correction of the electrode D |
MisalignementOffset |
Tango::DEV_DOUBLE |
|
ElectronicOffset |
Tango::DEV_DOUBLE |
|
OperatorOffset |
Tango::DEV_DOUBLE |
operator offset |
Locum4ProxyName |
Tango::DEV_STRING |
|
LowVoltageThreshold |
Tango::DEV_DOUBLE |
if the input voltages of the ADC decrease this threshold, the corresponding
average current attributes become ALARM ( ex : if |Vmes| < low_threshold)
|
HighVoltageThreshold |
Tango::DEV_DOUBLE |
if the input voltages of the ADC exceed this threshold, the corresponding
average current attributes become ALARM ( ex : if |Vmes| > threshold) |
SaiControllerProxyName |
Tango::DEV_STRING |
name of the SaiController device proxy |
OffsetZ1 |
Tango::DEV_DOUBLE |
offset on vertical position 1 |
OffsetZ2 |
Tango::DEV_DOUBLE |
offset on vertical position 2 |
Z1CorrectionTable |
Array of double |
offset list for Z1 position. one offset is associated to one gain.
Offset are ordered accortding increase gain order. |
Z2CorrectionTable |
Array of double |
offset list for Z2 position. one offset is associated to one gain.
Offset are ordered accortding increase gain order. |
XBPMVersion |
Tango::DEV_USHORT |
XBPM version. Value must be in range [1,2].
This property has no default value and must be defined. |
Kx_Factor |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 1.0 |
Kz_Factor |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 1.0 |
MisalignementOffsetX |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
MisalignementOffsetZ |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
OffsetX |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
OffsetZ |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
OperatorOffsetX |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
OperatorOffsetZ |
Tango::DEV_DOUBLE |
This property is only supported by the XBPM version 2
Defaults to 0.0 |
XCorrectionTable |
Array of double |
X gain correction table |
ZCorrectionTable |
Array of double |
Z gain correction table |